Uncertain multiobjective traveling salesman problem

Traveling salesman problem is a fundamental combinatorial optimization model studied in the operations research community for nearly half a century, yet there is surprisingly little literature that addresses uncertainty and multiple objectives in it. A novel TSP variation, called uncertain multiobjective TSP (UMTSP) with uncertain variables on the arc, is proposed in this paper on the basis of uncertainty theory, and a new solution approach named uncertain approach is applied to obtain Pareto efficient route in UMTSP. Considering the uncertain and combinatorial nature of UMTSP, a new ABC algorithm inserted with reverse operator, crossover operator and mutation operator is designed to this problem, which outperforms other algorithms through the performance comparison on three benchmark TSPs. Finally, a new benchmark UMTSP case study is presented to illustrate the construction and solution of UMTSP, which shows that the optimal route in deterministic TSP can be a poor route in UMTSP.     

数学建模思想渗入大学数学课堂教学的试验研究

以高等数学课堂教学为例,通过科学试验的方法分析数学建模思想渗入大学数学课堂教学对学生学习的影响力。通过精心设计教学试验,采集大量试验数据进行建模分析,结果表明,数学建模思想渗入高等数学课堂教学会对学生的学习产生积极影响,值得推广并长期坚持。     

防空导弹自动驾驶仪测试性建模研究与应用

为了得到防空导弹自动驾驶仪的故障检测与诊断策略,减少自动驾驶仪的测试费用,建立了自动驾驶仪的测试性模型并进行分析,解决了建模的难点。通过多层抽象混合推理故障建模方法推导了自动驾驶仪结构与测试点之间的关系,根据测试点的特征和自动驾驶仪工作原理建立信息流模型,在此基础上,利用故障与测试间的相关性矩阵来描述测试性模型。基于此模型设计了诊断策略构建方法。实际应用表明,建立测试性模型的方法完全正确,通过模型能够构建有效的检测与诊断策略,缩短测试时间。     

基于有源广义忆阻的无感混沌电路研究

采用常见元器件等效实现一个广义忆阻器, 进而制作出一个电路特性可靠的非线性电路, 有助于忆阻混沌电路的非线性现象的实验展示及其所产生的混沌信号的实际工程应用. 基于忆阻二极管桥电路, 构建了一种无接地限制的、易物理实现的一阶有源广义忆阻模拟器; 由该模拟器并联电容后与RC桥式振荡器线性耦合, 实现了一种无电感元件的忆阻混沌电路; 建立了无感忆阻混沌电路的动力学模型, 开展了相应的耗散性、平衡点、稳定性和动力学行为等分析. 结果表明, 无感忆阻混沌电路在相空间中存在分布2个不稳定非零鞍焦的耗散区和包含1个不稳定原点鞍点的非耗散区; 当元件参数改变时, 无感忆阻混沌电路有着共存分岔模式和共存吸引子等非线性行为. 研制了实验电路, 该电路结构简单、易实际制作, 实验测量和数值仿真两者结果一致, 验证了理论分析的有效性.     

A PBC‐DFT study of electronic properties of substituted polythiophenes

The electronic properties of polythiophenes substituted with various electron‐withdrawing and electron‐donating groups are investigated by employing periodic density functional calculations. The polymer is modeled as infinite one‐dimensional system with periodic boundary condition along the molecular direction. The effect of substitution on bandgaps is studied with various substituents like alkyls, halogens, aromatic and alkoxy groups in different regioregular forms. The alkoxy groups are found to substantially lower the bandgap of unsubstituted polythiophene, and aromatic groups in head–head/tail–tail forms are found to increase the bandgap. Irrespective of the type of substituents, groups that show deviations in planarity in oligomeric forms have shown an increase in bandgap in contrast to the general perception that head–head linkage always results in an increase in bandgap. Our study also confirms the previous findings that scaling from the oligomer bandgaps poses serious limitation to the prediction of polymeric bandgaps and that it should be evaluated with the infinite polymer system employing periodic boundary condition. Copyright © 2015 John Wiley & Sons, Ltd.     

六面体单元柔性桁架结构模型与逆模型的辨识

介绍了用自适应LMS滤波器离线辨识六面体单元柔性结构模型和逆模型的方法。文中论述了自适应滤波理论和自适应逆控制之间的关系，讨论了LMS算法，并以实验法测得的六面体单元柔性结构随机振动数据为基础对其模型和逆模型进行了辨识，为进一步开展该结构的自适应逆控制研究奠定了基础。     

Phase and Interfacial Tension Behavior of Certain Model Gas Condensates: Measurements and Modeling

This contribution reports on the phase and interfacial tension behavior of some model high-temperature–high-pressure gas condensates. On the one hand these types of gas condensate are becoming a subject of major interest for the oil industry, while on the other their phase and interfacial tension behavior have not been very well studied. For two different model gas condensates, both composed of the three n-alkanes, methane, butane, and decane, experimental results on their fluid phase behavior have been obtained in the temperature region 270 < T (K) < 490 and up to pressures as high as 24 MPa. Also, critical points of the two mixtures have been determined experimentally. Both mixtures show an extended retrograde region. Using the Peng–Robinson equation of state, the phase behavior of the two mixtures was modeled. In addition, the interfacial tension behavior of the model gas condensates was modeled. For that purpose, the Cahn–Hilliard theory was applied in combination with the Peng–Robinson equation of state. Satisfactory results were obtained.     

The effect of pore-structure on hysteresis in relative permeability and capillary pressure: Pore-level modeling

The effect of pore-structure upon two-phase relative permeability and capillary pressure of strongly-wetting systems at low capillary number is simulated. A pore-level model consisting of a network of pore-bodies interconnected by pore-throats is used to calculate scanning loops of hysteresis between primary drainage, imbibition and secondary drainage. The pore-body to pore-throat aspect ratio strongly influences the pattern of hysteresis. Changes in the patterns of hysteresis often attributed to consolidation can be understood in terms of changes in aspect ratio. Correlation between the sizes of neighboring pore-throats affects the shape of the relative permeability curves, while the width and shape of the pore-size distribution have only a minor influence.     

结构形状优化设计数值方法的研究和应用

本文论述了连续体结构形状优化设计数值方法的研究和应用进展,讨论了结构模型化、灵敏度分析、优化方法改进、优化实用软件开发以及同CAD技术相结合等问题,介绍了在结构优化设计软件MCADS中采用的方法,并通过工程实例说明了结构形状优化设计的应用及其价值。     

Numerical Solution and Sensitivity Analysis of Pore Liquid Pressure and Cake Porosity to Model Parameters

Filter cake formation is important in groundwater and oil wells where drilling contains suspended mud particles. The accumulation of these mud particles on the borehole wall creates a pressure drop in the well. Furthermore, the migration of colloidal particles into adjacent porous rock could damage the formation and cause productivity decline. In this study, numerical solutions for pore liquid pressure variation across the cake with variable total stress and associated porosity variation are obtained. Mass equations for captured and suspended particles are averaged along the mud cake thickness, taking into account conditions on the cake surface and at the filter septum. The variability of total stress in soil consolidations problem is considered to determine the pore liquid pressure along the mud cake thickness. Then, the relation between porosity and pressure is studied to determine the mud cake porosity. Experimental data obtained by various researchers is used to compare and test the validity of numerical solutions to develop guidelines for model applications. Results show that the pore liquid pressure increases with the decrease of membrane impedance value (i.e. less pervious membrane). Also, the pressure profile has a cubic function of dimensionless cake thickness. The conclusions from the sensitivity analysis conducted in this study agree with earlier conclusions.